Options

PDF Editor Layer > Operations > op.imagesToDoc > Options

Options Table

Name	Type	Value
NewPage	Dictionary	Specifies the parameters for creating new pages.
Cols	Integer	Specifies the number of the columns on the document page where the images will be inserted. Default value: 1
Rows	Integer	Specifies the number of the rows on the document page where the images will be inserted. Default value: 1
ColsGap	Double	Specifies the gap between the columns on the document page where the images will be inserted. Default value: 12.0
RowsGap	Double	Specifies the gap between the rows on the document page where the images will be inserted. Default value: 12.0
AlignH	Integer	Specifies the horizontal alignment of the image. Can be set to TJ_Left, TJ_Right or TJ_Center values of the PXV:PXC_TextJustification:PXC_TextJustification enumeration. Default value: TJ_Center
AlignV	Integer	Specifies the vertical alignment of the image. Can be set to TJ_Top, TJ_Bottom or TJ_Middle values of the PXV:PXC_TextJustification:PXC_TextJustification enumeration. Default value: TJ_Middle
FitType	Integer	Specifies how the image will be fitted into the cell. Possible values are: 0 (Off) Image will be cut by the borders of the cell. 1 (FitToCell) Size of the image will be decreased or increased to fit the cell if needed. 2 (ReduceToCell) Size of the image will be decreased to fit the cell if needed. Default value: 2 (ReduceToCell)
KeepAspect	Boolean	Specifies whether the aspect of the image will be kept or not when it's size would be changed to fit the cell. Default value: true
DrawLabels	Boolean	If true, the Labels will be drawn for the inserted images. Default value: false
Labels	Dictionary	Specifies the parameters for the labels that would be drawn for the inserted images.
Processing	Dictionary	Specifies the parameters for the images processing before it would be inserted into the document.
Postprocessing	Dictionary	Specifies the parameters for the images processing after it would be inserted into the document.
NewDoc	Dictionary	Specifies the parameters for the new document that would be created if DocID parameter of the TargetDoc dictionary is not valid.
TargetDoc	Dictionary	Specifies the target document where the images would be inserted.

NewPage Table

Name	Type	Value
PaperType	Integer	Specifies how the size of the new page will be chosen. Possible values are: 0 (Document) If the page is inserted at the beginning of the document, it's size will be copied from the first page of the document. Otherwise it will be the same as the size of the page before the inserted one. This value is invalid if the page is inserted into the new document. 1 (Standard) The size of the new page is defined by the StdPaperIndex and Landscape fields values. 2 (Custom) The size of the new page is defined by the Width, Height and Landscape fields values. 3 (BySource) The size of the new page is defined by the sizes of the inserted images. Default value: 1 (Standard)
StdPaperIndex	Integer	If the value of the PaperType field is 1 (Standard), this field specifies the size of the new page. The list of possible values are shown in the table. Default value: 4 (A4)
Landscape	Boolean	If the value of the PaperType field is 1 (Standard) or 2 (Custom), this field specifies whether the orientation of the new page is the landscape or not. Default value: false
Width	Double	If the value of the PaperType field is 2 (Custom), this field specifies the width of the new page in points (1/72 inch). Default value: 595.276
Height	Double	If the value of the PaperType field is 2 (Custom), this field specifies the height of the new page in points (1/72 inch). Default value: 841.89
Margins	Dictionary	Specifies the margins of the new page.
Rotation	Integer	Specifies the rotation of the new page in degrees. This value should be divisible by 90. Default value: 0

Labels Table

Name	Type	Value
AboveImage	Boolean	If the value is true, the label will be placed above the image. Otherwise, the label will be placed below the image. Default value: false
AddBookmark	Boolean	Specifies whether the bookmark will be added to the label or not. Default value: false
Para	Dictionary	Specifies the paragraph parameters of the label.
Font	Dictionary	Specifies the font parameters of the label.
Text	String	Specifies the text of the label. Default value: Empty String
BackColor	String	Specifies the background color of the label. Default value: N

Processing Table

Name	Type	Value
Scale	Dictionary	Specifies the downsampling options for the images.
Comp	Dictionary	Specifies the compression options for the images.
Conv	Dictionary	Specifies the conversion options for the images.

Scale Table

Name	Type	Value
Color	Dictionary	Specifies the downsampling options for the true color images.
Grayscale	Dictionary	Specifies the downsampling options for the grayscale images.
Indexed	Dictionary	Specifies the downsampling options for the indexed color images.
Mono	Dictionary	Specifies the downsampling options for the monochrome images.

Color Table

Name	Type	Value
Method	Integer	Specifies the downsampling algorithm Possible values are: 0 (None) No downsampling 1 (Linear) Linear downsampling algorithm 2 (Bilinear) Bilinear downsampling algorithm 3 (Bicubic) Bicubic downsampling algorithm Default value: 0 (None)
To	Integer	Specifies the target DPI. Default value: 96
IfAbove	Integer	Specifies the boundary DPI value. Only images with DPI above specified will be downsampled. Default value: 128

Grayscale Table

Name	Type	Value
Method	Integer	Specifies the downsampling algorithm Possible values are: 0 (None) No downsampling 1 (Linear) Linear downsampling algorithm 2 (Bilinear) Bilinear downsampling algorithm 3 (Bicubic) Bicubic downsampling algorithm Default value: 0 (None)
To	Integer	Specifies the target DPI. Default value: 96
IfAbove	Integer	Specifies the boundary DPI value. Only images with DPI above specified will be downsampled. Default value: 128

Indexed Table

Name	Type	Value
Method	Integer	Specifies the downsampling algorithm Possible values are: 0 (None) No downsampling 1 (Linear) Linear downsampling algorithm 2 (Bilinear) Bilinear downsampling algorithm 3 (Bicubic) Bicubic downsampling algorithm Default value: 0 (None)
To	Integer	Specifies the target DPI. Default value: 96
IfAbove	Integer	Specifies the boundary DPI value. Only images with DPI above specified will be downsampled. Default value: 128

Mono Table

Name	Type	Value
Method	Integer	Specifies the downsampling algorithm Possible values are: 0 (None) No downsampling 1 (Linear) Linear downsampling algorithm 2 (Bilinear) Bilinear downsampling algorithm 3 (Bicubic) Bicubic downsampling algorithm Default value: 0 (None)
To	Integer	Specifies the target DPI. Default value: 96
IfAbove	Integer	Specifies the boundary DPI value. Only images with DPI above specified will be downsampled. Default value: 128

Comp Table

Name	Type	Value
Color	Dictionary	Specifies the compression options for the true color images.
Grayscale	Dictionary	Specifies the compression options for the grayscale images.
Indexed	Dictionary	Specifies the compression options for the indexed color images.
Mono	Dictionary	Specifies the compression options for the monochrome images.

Color Table

Name	Type	Value
Method	Integer	Specifies the compression method for the true color images. The list of possible values are shown in the table. Default value: 0 (Auto)
JPEGQuality	Integer	If the Method value is 0 (JPEG), this field specifies the target quality of the JPEG. Default value: 75
JPEG2KLossless	Boolean	If the Method value is 0 (JPEG), this field specifies the target quality of the JPEG. Default value: false
Enabled	Boolean	Specifies... Default value: true
MRC	Dictionary	Specifies...

MRC Table

Name	Type	Value
ForegroundDownsampling	Double	Specifies... Default value: 4.0
BackgroundDownsampling	Double	Specifies... Default value: 2.0
BackgroundCompression	Dictionary	Specifies...
ForegroundCompression	Dictionary	Specifies...
MaskCompression	Dictionary	Specifies...
PresetID	String	Specifies... Default value: {6C1A9BCC-C143-4F76-A7D4-250CA7D9E5DF}

BackgroundCompression Table

Name	Type	Value
Method	Integer	Specifies... The list of possible values are shown in the table. Default value: 0 (Auto)
JPEGQuality	Integer	Specifies... Default value: 75
JPEG2KLossless	Boolean	Specifies... Default value: false

ForegroundCompression Table

Name	Type	Value
Method	Integer	Specifies... The list of possible values are shown in the table. Default value: 0 (Auto)
JPEGQuality	Integer	Specifies... Default value: 75
JPEG2KLossless	Boolean	Specifies... Default value: false

MaskCompression Table

Name	Type	Value
Method	Integer	Specifies... The list of possible values are shown in the table. Default value: 0 (Auto)
JBIG2Method	Integer	Specifies... Possible values are: 0 (Standard) ... 1 (CropBorders) ... 2 (Symbols) ... Default value: 0 (Standard)

Grayscale Table

Name	Type	Value
Method	Integer	Specifies... The list of possible values are shown in the table. Default value: 0 (Auto)
JPEGQuality	Integer	Specifies... Default value: 75
JPEG2KLossless	Boolean	Specifies... Default value: false
Enabled	Boolean	Specifies... Default value: true
MRC	Dictionary	Specifies...

MRC Table

Name	Type	Value
ForegroundDownsampling	Double	Specifies... Default value: 4.0
BackgroundDownsampling	Double	Specifies... Default value: 2.0
BackgroundCompression	Dictionary	Specifies...
ForegroundCompression	Dictionary	Specifies...
MaskCompression	Dictionary	Specifies...
PresetID	String	Specifies... Default value: {6C1A9BCC-C143-4F76-A7D4-250CA7D9E5DF}

BackgroundCompression Table

Name	Type	Value
Method	Integer	Specifies... The list of possible values are shown in the table. Default value: 0 (Auto)
JPEGQuality	Integer	Specifies... Default value: 75
JPEG2KLossless	Boolean	Specifies... Default value: false

ForegroundCompression Table

Name	Type	Value
Method	Integer	Specifies... The list of possible values are shown in the table. Default value: 0 (Auto)
JPEGQuality	Integer	Specifies... Default value: 75
JPEG2KLossless	Boolean	Specifies... Default value: false

MaskCompression Table

Name	Type	Value
Method	Integer	Specifies... The list of possible values are shown in the table. Default value: 0 (Auto)
JBIG2Method	Integer	Specifies... Possible values are: 0 (Standard) ... 1 (CropBorders) ... 2 (Symbols) ... Default value: 0 (Standard)

Indexed Table

Name	Type	Value
Enabled	Boolean	Specifies... Default value: true
Method	Integer	Specifies... Possible values are: 0 (Auto) ... 1 (PackBits) ... 2 (ZIP) ... 3 (LZW) ... Default value: 0 (Auto)

Mono Table

Name	Type	Value
Method	Integer	Specifies... The list of possible values are shown in the table. Default value: 0 (Auto)
JBIG2Method	Integer	Specifies... Possible values are: 0 (Standard) ... 1 (CropBorders) ... 2 (Symbols) ... Default value: 0 (Standard)
Enabled	Boolean	Specifies... Default value: true

Conv Table

Name	Type	Value
Color	Dictionary	Specifies...
Grayscale	Dictionary	Specifies...
Indexed	Dictionary	Specifies...
Mono	Dictionary	Specifies...

Color Table

Name	Type	Value
Method	Integer	Specifies... The list of possible values are shown in the table. Default value: 0 (None)
Dither	Integer	Specifies... Possible values are: 0 (false) ... 1 (true) ... Default value: 1 (true)

Grayscale Table

Name	Type	Value
Method	Integer	Specifies... The list of possible values are shown in the table. Default value: 0 (None)
Dither	Integer	Specifies... Possible values are: 0 (false) ... 1 (true) ... Default value: 1 (true)

Indexed Table

Name	Type	Value
Method	Integer	Specifies... The list of possible values are shown in the table. Default value: 0 (None)
Dither	Integer	Specifies... Possible values are: 0 (false) ... 1 (true) ... Default value: 1 (true)

Mono Table

Name	Type	Value
Method	Integer	Specifies... The list of possible values are shown in the table. Default value: 0 (None)
Dither	Integer	Specifies... Possible values are: 0 (false) ... 1 (true) ... Default value: 1 (true)

Postprocessing Table

Name	Type	Value
Despeckle	Boolean	Specifies... Default value: false
Deskew	Boolean	Specifies... Default value: false
OCR	Dictionary	Specifies...

OCR Table

Name	Type	Value
ExtParams	Dictionary	Specifies...
Enabled	Boolean	Specifies... Default value: false

ExtParams Table

Name	Type	Value

NewDoc Table

Name	Type	Value
PDFSpec	Integer	Specifies... Default value: -1
PDFStandard	Integer	Specifies... Default value: 0
AdobeExtLevel	Integer	Specifies... Default value: 0

TargetDoc Table

Name	Type	Value
DocID	Integer	Specifies... Default value: 0
Location	Integer	Specifies... Possible values are: 0 (Before) ... 1 (After) ... Default value: 1 (After)
Position	Integer	Specifies... Default value: -1